Pineline products suitability table for metals

The suitability of Pineline industrial cleaners for different metals, alloys and coatings under different conditions of use.
For explanations of the references in the table, see the table appendix after the table.

Concentration
pH (6)
Temperature range, ℃
Metal
Iron
Cast iron
Carbon steel
Stainless steel (2)
Copper
Brass
Galvanised steel (4)
Aluminium
Magnesium
Painted surfaces
Chamber detergent
2-5%
12-12,5
60...80℃
(1)
(1)
(1)
(3)
(2)
(2)
(5)
Pressure Wash HD
1-30%
11,5-13
5...80℃
(1)
(1)
(1)
(3)
(5)
Comp-Clean
1-3%
11-12,5
5...80℃
(1)
(1)
(1)
(3)
(5)
Metal-washing
1-30%
12,5-13,2
5...80℃
(1)
(1)
(1)
(3)
(2)
(2)
Comp-clean 35
1-4%
12-13
60...80℃
(1)
(1)
(1)
(3)
Parts-clean
2-5%
8-10
60...80℃
(1)
(1)
(1)
(3)
(2)
Fat-remover
1-30%
10-10,5
5...50℃
(2)
Power Cleaner
100%
11,4
0...40℃
(5)
Acid Cleaner
1-50%
1,5-3
0...40℃
(5)
Applies to
Not applicable
(1) It is recommended to rinse with water above 50 °C or to add Pineline Inhibitor Fe-8 to the rinse water (pit. 0,3 %).
(2) Different types of alloys behave differently in terms of corrosion.
(3) Corrosion may occur near the boiling point of the washing solution (>100 °C).
(4) For example, electro-galvanised steels.
(5) Primed pieces.
(6) When the concentration is within the guide concentration for use.